The idea of farmhouses is currently popular in the market regardless of your style or location. If you are asking yourself, what is a farmhouse table, here is an answer for you. A farmhouse is similar to conventional tables but has a few differences. The existence of farmhouses dates back to the 19th century. They were used for sorting out farm produce. In this article, we guide you on how farmhouse tables are constructed.
How to make a farmhouse table
Constructing a farmhouse table is easier than buying. They are easy to build and are made with readily available and inexpensive wood. Farmhouses are handcrafted and may either be used as a kitchen or dining table. It can be made following these simple steps:
- Wood saw
- Drill and driver kit
- Set of wood chisel
- Pocket screws
- Wood glue
Preparing the timber
Lumber has higher moisture content than wood that is used to make furniture. It is, therefore, advisable to let it lay around for some time to let it dry. Firstly, cut the pieces (top pieces, legs, stretchers, two sets of aprons, and the breadboard ends) out. The breadboard ends are wider than the tabletop, which acts as rustic detail. This allows the top to expand and contract with temperature changes without overlapping with the broadband ends. When cutting the legs, ensure their lengths fit.
Laying the base
Create a base assembly using the aprons, stretchers, and legs. Join one leg to either end of the short aprons and drill two holes on each of the aprons’ back. Hold the legs to the apron but fix a small piece of wood to act as the front spacer to create proper dimensionality. Attach the pieces using pocket screws. Repeat the process for the second apron. Use cross joints to join the two assemblies to stretchers.
Mark the positions of the joints on the stretcher and legs and cut up the joint edges using a saw. Spread the glue on both notched faces of the legs and the short stretcher and bind them together. Join the assembly using a pocket screw to lock the leg and stretcher together. Hide the hole using a dowel and trim it with a chisel to flush with the fit.
Join the long stretcher with its shorter counterpart by gluing the notches. Bore holes for fitting the pocket screws used for fastening. When doing this, ensure that the leg assemblies are at a square position. Measure and cut long aprons and join them to the leg assemblies with pocket screws. Join the top pieces and fit them tightly together. Spread the glue on the adjoining edges and fasten them with pocket screws. On each breadboard piece and tabletop ends, drill holes and attach the pieces with pocket screws. Smoothen out the surfaces by sanding and finishing them with a preferred wood conditioner or a wax coating.
When considering the question, what is a farmhouse, and thinking of making yourself one, remember that the table’s final outlook depends on the finishing. The level of shine depends on the number of wax coatings used. You can also use a dark tint to hide nicks and scratches that may arise much later. The dark tint also gives the table a more vintage look.